User's Manual

Document:
TBD
Page:
32 of 42
ENGINEERING
Documentation
Revision:
1.6
Date:
24-May-17
Title:
TND540 Requirement
Proprietary and Confidential
This document contains confidential and property information which belongs to Rand McNally, Inc. This
document may not be copied, reproduced, or transmitted to others in any manner, nor may any use of the
information on this document be made, except for the specific purposes for which it is transmitted to the
recipient without prior written consent of Rand McNally, Inc.
NOTES:
1. During temperature change, use a tolerance of not greater than 3⁰C.
2. Maintain the relative humidity at 95 r4% at all times except that during the descending temperature periods
the relative humidity may drop to as low as 85%.
3. Use a rate of temperature change between 30 and 60⁰C of not less than 8⁰C per hour.
4. Do not use a temperature increase in this portion of the curve that is less than 10⁰C per hour.
4.2 Moisture and Contaminates
Not applicable.
4.2.1 Rod Entry
Not applicable.
4.2.2 Drip
Not applicable.
4.2.3 Rust Resistance
Not applicable
PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.pdffactory.com