User's Manual

Document:
TBD
Page:
31 of 42
ENGINEERING
Documentation
Revision:
1.6
Date:
24-May-17
Title:
TND540 Requirement
Proprietary and Confidential
This document contains confidential and property information which belongs to Rand McNally, Inc. This
document may not be copied, reproduced, or transmitted to others in any manner, nor may any use of the
information on this document be made, except for the specific purposes for which it is transmitted to the
recipient without prior written consent of Rand McNally, Inc.
4.1.5 Thermal Cycle
The product shall perform in accordance with this specification before, during and after thermal cycle
according to following requirement. A total of 5 units shall be used for this test.
4.1.6 Relative Humidity
The product shall perform in accordance with this specification before, during and after exposure to 95 ± 4%
relative humidity (non-condensing). The unit shall be subjected to the 48-hour humidity cycle in accordance
with figure 507.4-1 of MIL-STD-810F and figure below. The unit shall be operated throughout the humidity
cycle. A total of 5 units shall be used for this test.
PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.pdffactory.com