User's Manual

Document:
TBD
Page:
23 of 42
ENGINEERING
Documentation
Revision:
1.6
Date:
24-May-17
Title:
TND540 Requirement
Proprietary and Confidential
This document contains confidential and property information which belongs to Rand McNally, Inc. This
document may not be copied, reproduced, or transmitted to others in any manner, nor may any use of the
information on this document be made, except for the specific purposes for which it is transmitted to the
recipient without prior written consent of Rand McNally, Inc.
2.3.3 Mechanical Requirement
Description TND540 Mechanical Specification
Environmental requirement See section 4.0 for spec
HALT Testing Standard RM HALT procedure. (See RM QA test procedure)
Unit Logo Requirement
Rand McNally logo, with UV coating
Meeting ASTM F2357 - RCA abrasion testing.
Sun Shield
Sun Shield N/A
Dash Mount
Dash Mount PND shall provide a dash mount option.
2.3.4 Device Appearance Requirement (Need update)
2.3.4.1 Device ID requirement
RM shall provide ID design file. Following are the ID concept front, back and side views.
● black Bezel
● no texture on the side walls - just soft touch paint
● no dot-pattern on the back housing - just soft touch paint
● enlarge the vent holes “bar design”
● Need to add “logo” in the front.
2.3.4.1 ID Rendering
PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.pdffactory.com