User's Manual

Document:
TBD
Page:
13 of 42
ENGINEERING
Documentation
Revision:
1.6
Date:
24-May-17
Title:
TND540 Requirement
Proprietary and Confidential
This document contains confidential and property information which belongs to Rand McNally, Inc. This
document may not be copied, reproduced, or transmitted to others in any manner, nor may any use of the
information on this document be made, except for the specific purposes for which it is transmitted to the
recipient without prior written consent of Rand McNally, Inc.
Battery Type/Size Polymer Li-Ion
Battery
ODM shall provide battery profile and compare with the battery
vendor’s data sheet
Battery voltage V.S capacity table
External Power Supply
120V Power Supply For In Home Use
(not a requirement for 540)
Input: 100 - 240 V
Input frequency: 50/60 Hz
Plug: U.S
Output Voltage: 5 Volts +/- 5%
Output Current: 2 Amps
Output Plug Type: Mini-B Plug
Minimum power cord length: 8”
* 120V wall charger is not included in retail package for
N/A
12V Power Cord With CLA
CLA shall meet following requirement:
● Output Voltage: 5 Volts +/- 5% (@ device input under load)
● Output Current: 2 Amps
● 8' length non-coil cord with Velcro-type wrap
● Power indicator light
Right angle mini-USB interface per RM spec
ESD Requirement
ESD
4kV ESD contact discharge
8KV ESD over the air discharge
2.3.2 OS Requirement
Description OS Requirements
ODM
Comments
OS and Platform Requirement
OS Version Android 5.1
Device model number TND540
OS Memory Partition
OS will have following memory partition:
/boot 128MB
/system 1GB
/cache 512MB
/data 12GB
Unit serial number
Unit shall have follow serial number programed in the protected area
of the flash memory;
PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.pdffactory.com