User guide

RJ-45 female pins description for Sub side units
Breakout connections to T1/E1 lines for the Sub side.
T1/E1 Line
RJ-45 Pin
T1 Signal
Twisted Pair
Recommended Color
A
4
IN +
A
5
IN –
A
1
OUT +
A
2
OUT –
B
4
IN +
B
5
IN –
B
1
OUT +
B
2
OUT –
Pair
Blue White
Pair
White
Pair
Orange White
Pair
Orange
Pair
Green White
Pair
Green
Pair
Brown White
Pair
Brown
Ethernet ports
There are five RJ45 Gigabit Ethernet electrical ports and one Gigabit optical port on the rear panel.
Ethernet built-in layer-2 switch function. Supporting VLAN setting based on 802.1Q or 802.1ad Q in Q,
and VLAN priority settings. The 6 GE ports could realize Ethernet switching function. Any one of them
can be used for uplink or local data transport, or anyone of GE electrical port could be used for NMS
port.
The GE electrical ports use RJ-45 sockets. Refer to the following Ethernet RJ-45 socket definition table.
Pin
1
2
3
4
5
6
7
8
Definition
TxD+
TxD-
RxD+
•
•
RxD-
•
•
Note: 10/100Base-Tx interface has HP auto-MDIX function and it can check the transmission and
receiving sequence and make configuration. So both MDI and MDI-X interfaces are supported and both
cross line and direct line can be selected.
The Ethernet optical port uses an SFP optical transceiver. Different transceivers are available to suit
multimode, single mode, distance and fiber connector requirements. The input and output side of the
transceivers are marked on the transceiver itself. Refer to the Ordering Information section for
compatible transceivers available form RLH.
Power
Two po w er su p pl i es are av a il a bl e , 1 15 A C a nd 24 ~ 48 V DC . T h ere are t wo po w er su p pl y s l ot s o n t h e
chassis, and power supplies may be used in any combination. The power supplies are redundant, with
automatic fall-over in the event one power supply fails or loses input. Power supply options are specified
during ordering, and spares are available. See the Specifications section and Ordering Information
section for additional information.
16! RLH Industries, Inc. - 16 Channel T1/E1 over GE with Fiber! Components