User guide

Dip Switches
There are four DIP switches on the front panel. Refer to the DIP switch table below.
Label
Switch
Number
Definition
Setting
LED
Description
Notes
LED_MODE
1
T1 packet loss
alarm indicator
LED_MODE
1
T1 packet loss
alarm indicator
LED_MODE
1
T1 packet loss
alarm indicator
LED_MODE
1
T1 signal alarm
status indicator
LED_MODE
1
T1 signal alarm
status indicator
LED_MODE
1
T1 signal alarm
status indicator
LED_MODE
2
Remote equipment
link status
Indicator
LED_MODE
2
Remote equipment
link status
Indicator
LED_MODE
2
-
NO_VLAN
3
Software VLAN
NO_VLAN
3
Software VLAN
TMP_IP
4
IP address setting
TMP_IP
4
IP address setting
ON
ON
Ethernet interface cannot receive
T1
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
ON
OFF
Ethernet interface has T1 packet
loss
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
ON
Blinking
Normal operation
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
OFF
ON
T1 interface signal loss
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
OFF
OFF
T1 interface signal AIS alarm
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
OFF
Blinking
T1 interface signal loss
Only when DIP
switch 2 is set to
OFF will this setting
be valid.
ON
ON
Addressing remote MAC
ON
OFF
Not addressing remote MAC
OFF
-
Set according to DIP switch No. 1
ON
-
Software VLAN Disabled
Use caution not to
configure VLAN list
incorrectly or
management may be
disabled
OFF
-
Software VLAN set is valid
ON
-
Default IP address
192.192.192.192
OFF
-
Manually set IP address
14! RLH Industries, Inc. - 16 Channel T1/E1 over GE with Fiber! Components