Specifications

3." Before Installing
Observe Special Handling Requirements
Be careful when handling electronic components
ATTENTION
ELECTROSTATIC
SENSITIVE
DEVICES
• This product contains static sensitive components.
• Handle the T1/E1 cards and optical modules by their faceplates only.
• Follow proper electrostatic discharge procedures.
This card utilizes circuitry that can be damaged by static electricity. When transporting the card, carry it in an ESD
safe container such as the antistatic bag provided with the card. Before handling cards, discharge yourself of
static electricity by physical bodily contact with earth ground. When handling cards, hold by outer edges and
avoid touching circuitry. Failure to follow ESD precautions may cause serious damage to the card and prevent
proper operation.
Guidelines for handling terminated fiber cable
• Do not bend fiber cable sharply. Use gradual and smooth bends to avoid damaging glass fiber.
• Keep dust caps on fiber optic connectors at all times when disconnected.
• Do not remove dust caps from unused fiber.
• Keep fiber ends and fiber connectors clean and free from dust, dirt and debris. Contamination will cause signal loss.
• Do not touch fiber ends.
• Store excess fiber on housing spools or fiber spools at site
17! RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! Before Installing