User guide

Note:#function key [F8]
If the EOC (embedded channel) had broken such as in the aggregate remote loopback
state then Undo-AgReLBK[F8] can be used to re-built the EOC channel. But, if the
optical signal is lost, this function won't be enabled.
95
Notice function key [F8]
If the EOC (embedded channel) had broken such as in the aggregate
remote loopback state then [F8] Undo-AgReLBK can be used to re-built the
EOC channel. But, if optical signal lose, this function won't enable.
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 99