User guide
Trunk Ether net QoS Port Config
Trun k Ethernet Qo S Port Co nfig Screen
This screen specifies the QoS configuration for every trunk ethernet port.
QoS Mode
Mode
Description
Disable
Turn off the QoS function for this port
PortBased
Turn on the the QoS function, and the priority of each packet received from this port is
assigned by the following [Priority] setting. There are four priority levels, Queue1, Queue2,
Queue3, and Queue4.
Tagged
In this mode, when a packet is VLAN-tagged or priority-tagged, the priority is specified by
the 3-bit tag. When a packet is untagged, its priority is assigned by the following [Priority]
setting.
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 75