User guide

Trunk Ether net Port VLAN Config

Trun k Ethernet VL A N Config Screen

Begin setting up the VLAN configuration by using this menu.

Note:"The PVID (Port VLAN ID) must be between 1 and 4094. The PVID number set in this

menu must also be used for the same port in the Trunk Ethernet VLAN

Configuration screen.

Egress Mode

Mode

Description

Unmodified

Do not insert or remove VLAN tag to/from packets sent out from this port.

Untagged

If tagged packets are received, the switch will remove VLAN tag from packets

Tagged

If untagged packets are received, the switch will add Ingress PVID. And do nothing when

switch receive any tagged packets

Retagged

If tagged packets received, switch will remove VLAN tags than add new tags as PVID. It is

a replacement processing for tagged packets and insertion for untagged packets

After confirming the changes by selecting Confirm [F2], select [6] Trunk Ethernet VLAN Table

Configuration from the Trunk Ethernet Configuration Selection main menu to continue

configuring VLAN.

System Conﬁguration# RLH Industries, Inc. • 866-DO-FIBER • www.ﬁberopticlink.com! 73