User guide

Trunk Ether net Port Rate Config ur ation
Trun k Ethernet Po r t Rate C onfigurat ion
You may change the Fast Ethernet port speed to another port speed. Each port may be set individually by setting
the ingress and egress speed to desired speed. This setting may be extended to cover multiple network ports or
limited to just either ingress or egress if needed.
•
1526 = 100M
•
152 = 10M
•
Ingress = RX
•
Egress = TX
72! RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! System Configuration