User guide

Trunk Ether net General Paramete r Config
If the remote side shows no device or LOS, the screen will
not show the remote side.
Trun k Ethernet Ge n eral Con figuratio n Screen
Set the [F1] VLAN function as desired.
VLAN Function
Mode
Setting
Description
Ingress Filter
Enable
Drop frame associated with a VLAN for which that port is not in
the member set.
Ingress Filter
Disable
Disable ingress filtering.
Tag Aware
Enable
Tagged-based.
Tag Aware
Disable
Port-based
Tag Only
Enable
Only accepts tagged frames and drop untagged ones.
Tag Only
Disable
Accepts tagged and untagged frames.
Note:"Refer to page 65, Trunk Ethernet Port VLAN Config, to configure the VLAN
functions.
70! RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! System Configuration