User guide

Eight E1 channels and one V.35 channel mode

4. Four E1 channels and one V.35 channel mode

In this mode, user can also do the PRBS test which is like the figure as

above. The remote side@s channel generates the test pattern to corresponding

channels in the local side.

Remote

(4E1 card) Ch1 ~ Ch3 Local@s (4E1 card) Ch1~Ch3

Remote

(4E1 card) Ch4 Local@s (V35 card) Ch5

Remote

(V35 card) Ch5 Local@s (4E1 card) Ch4

Note: To avoid unexpected error, DO NOT insert any card in TB3 at remote side,

while TSA function was turned on.

TB1TB2

Normal mode

CH4 <-> CH5

Mode

(4E1+1V.35)

TB2 TB1

Normal

Mode

CH4"!CH5

Mode

(4E1+1V.35)

TB2 TB1

In this mode, user can also do the PRBS test as reflected in the figure as above. The remote side’s channel

generates the test pattern to corresponding channels in the local side.

Remote (4E1 card) Ch1~Ch3 $ !$ Local’s (4E1 card) Ch1~Ch3

Remote (4E1 card) Ch4$ !$ Local’s (V35 card) Ch5

Remote (V35 card) Ch5$ !$ Local’s (4E1 card) Ch4

Note:"To avoid unexpected errors, DO NOT insert any card in TB2 and TB3 at remote side while

TSA function is ON.

66! RLH Industries, Inc. • 866-DO-FIBER • www.ﬁberopticlink.com! System Conﬁguration