User guide

Choose the Edit[F2] to set channel service types.
E1 Channel Parameter Editing
The [F1] Circuit Identifier lets you assign a name to the circuit if desired.
The [F3] Service Mode setting has two service modes which can select OOS (Out of Service) or IS (In
Service).
Set the frame type with [F4] Frame Type. There are three types of E1 services available: FAS+CRC, FAS
Only, Unframed.
Set the line coding with [F5] Line Coding. There are two types of E1 line coding: HDB3 or AMI.
Choose Confirm[F2] to save the settings.
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 57