User guide

E1 Interface Configuration

[F3]Site: Select Local, Remote or All (both sites) by

using the Space Bar, press the Enter key to select it.

[F4]SlotId: Select 1~4 slots or All by using the

Space Bar, press the Enter key to select it.

[F3]ChId: Select 1~4 individual channel ID to setup or All

by using the Space Bar, press the Enter key to select it.

E1 Interface Configuration Screen

Select the iMux site you want to change, the Tributary Slot ID, and the individual channel ID before configuring

parameters. You may edit E1 Parameters for each channel or all channels of selected.

Use Slot Edit[F6] to edit the parameters of all channels in the same slot.

Choose Group IS[F7] to let the selected channels in the screen go into the in-service state, or

Group OOS[F7] to set them to out of service.

56! RLH Industries, Inc. • 866-DO-FIBER • www.ﬁberopticlink.com! System Conﬁguration