User guide

Network Time Synchronization
Network Time Synchronization Screen
You may set the System clock manually, or use the network time synchronization function. To use a time server
press [F1] and enter the time server IP address and time zone, then execute the Synchronize[F5]
command. The system clock will be automatically set via Internet.
When user selects the synchronize commend item in local or remote side, the running status will show the
following messages:
Start Synchronizing!
Synchronizing!
Synchronizing Complete!
Synchronizing Error!
If there is a synchronize error, the iMux will display one of the following error messages:
Internal Error!
Information Incomplete!
Synchronization is running!
Time Get Error!
Abort by user!
Timeout!
No Error
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 39