User guide

Device Networking Configuration
Device Networking Configuration Screen
Setting the device IP
You can set the device IP of the front panel MGMT port in this screen. The MGMT port IP address is static, so
make sure there isn’t a conflict on your network prior to confirming the settings.
Press Confirm[F2] to execute your changes and direct the system to use those settings immediately. Your
changes will now be reflected as the running IP status.
Press Set Only[F5] when making IP changes that will only be held in temporary memory, without committing
the changes to the running IP. Press Confirm[F5] to commit your temporary settings as the running IP.
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 31