User guide

Specifications
Transmissio n method
Frequency modulated light via two optical fibers
Frequency modulated light via two optical fibers
Frequency modulated light via two optical fibers
Transmissio n method
Multimode
850nm/1310nm/1550nm
850nm/1310nm/1550nm
Transmissio n method
Single-mode
1310nm/1550nm
1310nm/1550nm
Maximum Fiber
Attenuation / Distance*
Single Fiber,
Bi-directional
Multimode (62.5/125µm):
1.25mi./2 km range
Maximum Fiber
Attenuation / Distance*
Single Fiber,
Bi-directional
Single-mode (9/125µm):
12.4 mi./20km range
Maximum Fiber
Attenuation / Distance*
Single Fiber,
Bi-directional
Single-mode (9/125µm):
24.9 mi./40km range
Maximum Fiber
Attenuation / Distance*
Single Fiber,
Bi-directional
Single-mode (9/125µm):
37 mi./60km range
Maximum Fiber
Attenuation / Distance*
Dual Fiber
Multimode (62.5/125µm):
1.25mi./2 km range
Maximum Fiber
Attenuation / Distance*
Dual Fiber
Single-mode (9/125µm):
12.4 mi./20km range
Maximum Fiber
Attenuation / Distance*
Dual Fiber
Single-mode (9/125µm):
37 mi./60km range
Maximum Fiber
Attenuation / Distance*
Dual Fiber
Single-mode (9/125µm):
74 mi./120km range
Maximum Fiber
Attenuation / Distance*
*Note: Distances equated using industry standard fiber and connector attenuation of 3dB/
Km. Fiber condition, splices and connectors may affect actual range.
*Note: Distances equated using industry standard fiber and connector attenuation of 3dB/
Km. Fiber condition, splices and connectors may affect actual range.
*Note: Distances equated using industry standard fiber and connector attenuation of 3dB/
Km. Fiber condition, splices and connectors may affect actual range.
Fiber Type
(ST, SC or FC connectors) Multimode: 62.5/125µm,
Single-mode: 8-9/125µm
(ST, SC or FC connectors) Multimode: 62.5/125µm,
Single-mode: 8-9/125µm
(ST, SC or FC connectors) Multimode: 62.5/125µm,
Single-mode: 8-9/125µm
Consumption
+2 to -11dBm
+2 to -11dBm
+2 to -11dBm
Sensitivity
Better Than -36dBm
Better Than -36dBm
Better Than -36dBm
BER
<10
-9
<10
-9
<10
-9
Phone Connector
RJ-45 shared for both POTS Channels, breakout cable included
RJ-45 shared for both POTS Channels, breakout cable included
RJ-45 shared for both POTS Channels, breakout cable included
Audio Frequency
300Hz-3400Hz
300Hz-3400Hz
300Hz-3400Hz
Impedance
200Ω 560Ω//0.1µF
200Ω 560Ω//0.1µF
200Ω 560Ω//0.1µF
Baud Rate
9600 maximum
9600 maximum
9600 maximum
Compression Ratio
Class A in ITU G.711
Class A in ITU G.711
Class A in ITU G.711
Loop Current
25mA
25mA
25mA
Ethernet
10/100M, full/duplex, auto negotiation
10/100M, full/duplex, auto negotiation
10/100M, full/duplex, auto negotiation
Protocol
IEEE 802.3
IEEE 802.3
IEEE 802.3
Data Rate
100 Mbps
100 Mbps
100 Mbps
Max Packet Size
1518 bytes
1518 bytes
1518 bytes
Ethernet Connector
RJ-45
RJ-45
RJ-45
Power Requirements
Nominal
24VDC ~ 48VDC
Power Requirements
Max Range
22VDC ~ 62VDC
Max Power Consumption
≤5W
≤5W
Dimensions/Mounting
L 7in. x H 4in. x W 1in. (177.8mm x 101.6mm x 25.4mm)
L 7in. x H 4in. x W 1in. (177.8mm x 101.6mm x 25.4mm)
L 7in. x H 4in. x W 1in. (177.8mm x 101.6mm x 25.4mm)
Dimensions/Mounting
Compatible with RLH Fiber Link card housings
Compatible with RLH Fiber Link card housings
Compatible with RLH Fiber Link card housings
Operating Temperature
14°F to +122°F (-10°C to +50°C)
14°F to +122°F (-10°C to +50°C)
14°F to +122°F (-10°C to +50°C)
Humidity
95% non-condensing
95% non-condensing
95% non-condensing
! RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax [phone] • www.fiberopticlink.com! Page 9