Product guide

RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867 USA • tel (866) DO-FIBER • fax [phone]
email: [e-mail] • www.fiberopticlink.com
ADSS HARDWARE
For aerial fiber optic applications in electrically hazardous environments it is recommended to use ADSS (All-Dielectric Self
Supporting) cable. ADSS fiber cable contains an aramid strength member eliminating the need to lash to a messenger. There are two
types of hardware to attach ADSS fiber optic cable to a pole; dead ends and support bracket.
DEAD END DEAD ENDSUPPORT BRACKET
ADSS hardware application diagram
ADSS Support Bracket ADSS Dead End Support Mid-Span Storage Bracket
Part Number Description
8806-1377-01 ADSS Support Bracket
8806-1375-01 ADSS Dead End Support
8806-1376-01 ADSS Mid-Span Storage Bracket
FIBER MARKER ACCESSOIRIES Fiber Management
Marker Ball Marker Tape Marker Post
Essential fiber cable marker accessories for buried cable. Since fiber optic cable isn't normally detectable by buried cable detectors,
it's important to identify buried fiber to avoid accidental damage.
Part Number Description
RLH-MBM-01 Marker Ball
RLH-MTP-ND Marker Tape (Non-Detectable) 3" x 1000' Roll
RLH-FMP-06 Marker Post - 6' (* Note: Custom printing available. )
ACCESSORIES
57