Product guide

RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867 USA • tel (866) DO-FIBER • fax (714) 532-1885
email: info@fiberopticlink.com • www.fiberopticlink.com
FIBERGLASS CABINETS Enclosures
These NEMA-4 enclosures are constructed of dielectric molded fiberglass-reinforced material that is easily tailored on the job site,
and may be punched, drilled, filled, or sawed.
The exterior surface is light gray with UV protection. Fiberglass cabinets are equipped with a hinged door with padlock latch, foam
gasket seal, vents, mounting feet, hardware, and painted plywood backboard. RLH Fiberglass Enclosures provide long-lasting
protection for housing electrical components, and can be used in both indoor and outdoor environments.
Telco Interface Units with FIber Optic Link housings and pre-wired terminal blocks are also available.
Small Fiberglass Enclosure Standard Fiberglass Housing Large Fiberglass Housing
Part Number Cabinet Style External Dimensions (H x W x D Inches)
RLH-242010-F Small 24 x 20 x 10
8806-1280-01 Small 24 x 24 x 10
8806-1450-01 Small 30 x 24 x 10
8806-1282-01 Standard 24 x 24 x 13
8806-1283-01 Standard 24 x 24 x 16
8806-1284-02 Standard 30 x 24 x 16
8806-1286-01 Standard 40 x 32 x 13
RLH-363016-F Large 36 x 30 x 16
RLH-363616-F Large 36 x 36 x 16
RLH-483616-F Large 48 x 36 x 16
RLH-603616-F Large 60 x 36 x 16
* Note: Add PMK to part number to add pole mount bracket
FIBERGLASS TELCO INTERFACE UNITS Enclosures
Part Number Description Cabinet Size Pre-wired Terminals
8806-1415-01 5-Card Telco Interface Unit H24” x W24” x D16” 10-pair copper terminal
8806-1416-01 8-Card Telco Interface Unit H24” x W24” x D16” 25-pair copper terminal
8806-1417-01 12-Card Telco Interface Unit H24” x W24” x D16” 25-pair copper terminal
8806-1288-01 5-Card Telco Interface Unit H40” x W32” x D13” 10-pair copper terminal
8806-1294-01 8-Card Telco Interface Unit H40” x W32” x D13” 25-pair copper terminal
8806-1290-01 12-Card Telco Interface Unit H40” x W32” x D13” 25-pair copper terminal
* Note: Add PMK to part nu
m
m
ber to add pole mount bracket
* Note: Add PT to part num
b
b
er to substitute a 3-element gas tube pro
t
t
ected terminal
* Note: Add NT to part number for no copper terminal
CABINETS / PEDESTALS
33