Product guide

20
RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867 USA • tel (866) DO-FIBER • fax [phone]
email: [e-mail] • www.fiberopticlink.com
RLH VIDEO OVER FIBER MUX SYSTEMS Multiplexers
The RLH Video Mux System is the flexible mulit-port member of the
Video Over Fiber family. This system uses video mux modules
available in either a convenient standalone housing, or a rack module
that can be combined into our redundant power, EIA 19" 4RU rack
chassis.
Perfect for multi-channel monitoring, the modules may be combined
together to transmit up to 64 video channels over a single fiber. Each
module may contain up to 8 video channels, and up to 9 modules for
may be used in the rack chassis for a total of 72 channels.
Standard features include auto configuring video channels, fiber optic
port, and up to 4 additional port options, depending on configuration.
Options include auto sensing single way or bi-directional data port for
remote PTZ camera control from a PTZ controller or data
transmission, 10/100 full/half auto negotiating ethernet port, reverse
audio, bi-directional audio, and analog telephone.
A typical system consists of a transmitter and a receiver unit as a set.
2 Channel Standalone Module 2 Channel Rack Module Rack Module and 19” Rack Housing
Manufacturer
RLH VM 8 E N N
Product Designation
Number of Video Channels
Fiber Type
MM = Multimode, 3km
S1 = Single Mode, 20km distance
S2 = Single Mode, 40km distance
S3 = Single Mode, 120km distance
1 to 8 (See Port Options)
Video TX/RX
T = Transmitter
R = Receiver
Model Designation
Module Type
S = Standalone - 115VAC power adapter
U = Standalone - 24VDC power adapter
V = Standalone - 48VDC power adapter
R = Rack Module
Ports 3&4 Options
(Use None if less than 5 video channels)
Port 1 Option
Ports 1&2 Options
Port 2 Option
Port 3 Option
Port 4 Option
Fiber Connector Style
Video Mux Modules Part Number Matrix
Example: RLH-VM6-MMST-EBANRR-01
Video mux module, 6 video channels, multimode fiber, ST connector
1 etherenet port, 1 bi-directional data port, 1 bidirectional audio port, rack mount module, video receiver module
ST = ST Connector
SC = SC Connector
FC = FC Connector
B R T01S1 ST
N = None
B = Bi-directional Data RS232, RS422, RS485
D = Single Way Data RS232, RS422, RS485
A = Bi-directional Audio
R = Reverse Audio
E = Ethernet 10/100
T = Analog Telephone
S = I/O Switch
N = None
B = Bi-directional Data RS232, RS422, RS485
D = Single Way Data RS232, RS422, RS485
A = Bi-directional Audio
R = Reverse Audio
E = Ethernet 10/100
T = Analog Telephone
S = I/O Switch
Standard Features
Multi channel video over fiber solution
Up to 8 video channels per stand-alone or rack module
Up to 64 video channels over 1 fiber
Available in Single or Multi-mode, up to 74mi /120km fiber range
Auto sensing video NTSC/PAL/SECAM via BNC connector
Simultaneous transmission of video, data and audio
Large dynamic range, no video or fiber adjustments required
Eliminates EMI, RFI, cross talk or ground loop issues
Powering options include 115VAC, 24VDC or 48VDC. 5VDC
power adapter included.
Ethernet, I/O switch, data, analog, voice or analog telephone port
options
Data port is auto configuring RS232/422/485 port for convenient
PTZ camera control
High quality 10-bit uncompressed video transmission
Automatically supports any high resolution signal
MULTIPLEXERS