Product guide

RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867 USA • tel (866) DO-FIBER • fax [phone]
email: [e-mail] • www.fiberopticlink.com
Fiber Type Connector Style T1 4x1 Mux CO Card
(Line Powered or 24-56VDC)
T1 4x1 Mux Sub Card
(Line Powered or 24-56VDC)
Multimode ST 8806-1345-01 8806-1355-01
Multimode SC 8805-1345-01 8805-1355-01
Single-mode ST 8806-1385-01 8806-1395-01
Single-mode SC 8805-1385-01 8805-1395-01
Single-mode (Long Haul) ST 8806-1385-01LH 8806-1395-01LH
Single-mode (Long Haul) SC 8805-1385-01LH 8805-1395-01LH
* Note: Add -RJ to part nu
m
m
ber to include RJ adapter
w
w
ith the card
Part Number Description
RLH-RJ4X1-CO Pack of 4 RJ-48C Adapters for CO T1 4x1 Mux Cards
RLH-RJ4X1-SUB Pack of 4 RJ-48C Adapters for SUB T1 4x1 Mux Cards
Fiber Type Connector Style 4 Ch. Contact Closure Transmitter
(24-56VDC Local Power)
4 Ch. Contact Closure Receiver
(24-56VDC Local Power)
Multimode ST 8806-1504-01 8806-1514-01
Multimode SC 8805-1504-01 8805-1514-01
Single-mode ST 8806-1524-01 8806-1534-01
Single-mode SC 8805-1524-01 8805-1534-01
Single-mode (Long Haul) ST 8806-1524-01LH 8806-1534-01LH
Single-mode (Long Haul) SC 8805-1524-01LH 8805-1534-01LH
Fiber Type Connector Style 8 Ch. Contact Closure Transmitter
(24-56VDC Local Power)
8 Ch. Contact Closure Receiver
(24-56VDC Local Power)
Multimode ST 8806-1508-01 8806-1518-01
Multimode SC 8805-1508-01 8805-1518-01
Single-mode ST 8806-1528-01 8806-1538-01
Single-mode SC 8805-1528-01 8805-1538-01
Single-mode (Long Haul) ST 8806-1528-01LH 8806-1538-01LH
Single-mode (Long Haul) SC 8805-1528-01LH 8805-1538-01LH
T1 4x1 MUX
The T1 Multiplexer (or Fiber Mux System) transports up to four T1 lines over
two strands of fiber. The 4x1 card has B8ZS and AMI compatibility, and
contains LED status indicators for convenient system monitoring. The T1 4x1
Fiber Mux card can be installed into any Fiber Optic Link shelf or housing,
providing high density T1 over fiber in a single card slot. The T1 4x1 Mux card
is a cost effective solution for high capacity applications.
With Screw Terminals With RJ Adapters
4 AND 8 CHANNEL CONTACT CLOSURE
The Fiber Optic Link Contact Closure system provides a
transmission of up to four independent contact closure
signals over one optical fiber. The transmitter card provides
the electrical-to-optical interface between dry contact
closure relay input and a fiber strand.
The Contact Closure receiver card provides the optical-to-
electrical interface between a fiber strand and normally-open
relay contact output. The Receiver card is locally powered by
a 24-56VDC source and provides LED indicators to display
relay conditions, power, and fiber carrier receive.
4 Channel Contact Closure Card 8 Channel Contact Closure Card
MULTIPLEXERS
17