Product guide

10
RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867 USA • tel (866) DO-FIBER • fax [phone]
email: [e-mail] • www.fiberopticlink.com
Fiber Type Connector Style 10
/
/
100 Ethernet CO/Sub Card
(24-56VDC Local Power)
Multimode
ST EF4-MMSTD-02 2km / 1.25mi.
Multimode
SC EF4-MMSCD-02 2km / 1.25mi.
EF4-S1STD-02 20km / 12.4mi.
ST
EF4-S3STD-02 60km / 37mi.
Single-mode
EF4-S4STD-02 120km / 74mi.
Single-mode
EF4-S1SCD-02 20km / 12.4mi.
SC
EF4-S3SCD-02 60km / 37mi.
EF4-S4SCD-02 120km / 74mi.
Fiber Type Connector Style Gigabit Ethernet CO/Sub Card
(24-56VDC Local Power)
Multimode ST 8806-1512-01
Multimode SC 8805-1512-01
Single-mode ST 8806-1522-01
Single-mode SC 8805-1522-01
Single-mode (Long Haul) ST 8806-1522-01LH
Single-mode (Long Haul) SC 8805-1522-01LH
RS-422/485 SERIAL DATA
The RLH Fiber Optic Link RS-422 and RS-485 Interface Card converts serial data signals in to
optical transmission signals over single or mulitmode fiber. It is ideal for telco service providers and
enterprise level users to connect to communication devices such as Utility, Wireless, PBX,
Multiplexers, Routers and other serial data devices via fiber optic cable.
The RS422/485 system operates in pairs, extending distances over fiber, improving noise immunity
and quality of service while improving intrusion protection, high voltage communications protection
and network security.
Fiber Type Connector Style RS-422/485 Fiber Optic Link Card
Multimode ST 8806-1532-01
Multimode SC 8805-1532-01
Single-mode ST 8806-1542-01
Single-mode SC 8805-1542-01
Single-mode (Long Haul) ST 8806-1542-01LH
Single-mode (Long Haul) SC 8805-1542-01LH
10/100 ETHERNET
The Fiber Optic Link 10/100 Ethernet interface card converts a 10/100BaseT RJ45 port to an
optical signal for transmission over either multimode or single-mode fiber optic cable. It provides
half or full duplex operation, features crossover switch for easy connection to hub or workstation,
and is interoperable with other 10/100 BaseT and BaseFL devices. See the data sheet for single fiber
bidirectional models.
GIGABIT ETHERNET
The RLH Fiber Optic Link Gigabit Ethernet Interface Card converts an IEEE 802.3ab compatible
copper 1000BASE-T to a fiber optic 1000BASE-X transmission signal of either multimode or single-
mode. Multimode and single-mode cards provide transmission of the data signals over a fiber optic
facility to extend the circuit and provide electrical isolation between the network and distant
connection.
FIBER OPTIC LINKS