User guide

www.rletech.com 56 970.484.6510
4 Web Interface – Integration Version
4.2.4 System Info
The System Info section displays detailed information about the system, including the
Program Id (firmware version), Program Size (size of the firmware file), Bootloader Version,
and sysUp Time, or how long the system has been running since power was applied.
Figure 4.10 System Info Section
4.2.5 EIA-485
Use this section to configure the system’s EIA-485 port settings.
Figure 4.11 EIA-485 Section
Option Description
EIA-485 Port
Function
Set the output type for the EIA-485 port to either Modbus-Slave or
Bacnet-MS/TP.
EIA-485 Baud Rate Select 1200, 2400, 9600(default) or 19200.
EIA-485 Parity Select None (default), Even or Odd.
EIA-485 Slave
Address
Set a RTU address from 1–254. If the field is left at 0, there is no
transmission on the EIA-485 port.
Table 4.6 EIA-485 Section