User guide

www.rletech.com 35 970.484.6510
3 Web Interface – Standard Version
The BACnet pics link displays general BACnet capabilities of the device (e.g., what LAN
options are available).
Figure 3.19 General BACnet Capabilities of the Device
3.5.3 Modbus
The Modbus section allows users to configure the Modbus settings for the system.
Figure 3.20 Modbus Section
3.5.4 SNMP
The SNMP configuration section also allows users to setup communities that allow multiple
SNMP systems to access the Wireless Gateway. To setup communities, you must know the IP
address of the SNMP Management system and the Community String. Contact your IT
Department to obtain the IP Address and Community String. To configure communities, enter
Option Description
Modbus/TCP/UDP
Slave Unit Identifier
The default slave unit identifier is 0, which disables this feature.
To enable this option, enter a TCP/UDP slave address from 1-254
in this field. In most instances, the identifier is typically set at 1.
Table 3.13 Modbus Section Option