User guide

www.rletech.com 34 970.484.6510
3 Web Interface – Standard Version
3.5.2 BACnet/IP
The BACnet/IP configuration section allows users to configure several settings.
Figure 3.18 BACnet Section
Option Description
Device ID Assign a name to uniquely identify each BACnet device on the
network.
Device Name Assign a name - up to 40 characters - to the unit for BACnet
discovery/integration.
Description Add any additional details about the device. 40 characters,
maximum.
UDP Port The default port is 0=47808. If a you would like to use a specific
port for security reasons, enter a new port number in this field.
BBMD Data The values in the broadcast distribution table represent IP
addresses and masks. Shown here for reference, the values are
editable via BACnet.
Table 3.12 BACnet Section Options