User guide

www.rletech.com 15 970.484.6510
2 Getting Started
Figure 2.3 Ethernet Connection to a PC Using a Crossover Cable
Figure 2.4 Ethernet Connection to a PC on a Subnet, Using a Hub/Switch and CAT5 Cables
2.3.2 EIA-232 COM Connection
The Wireless Gateway can be connected directly to a PC through its EIA-232 port. This is
useful for IP configuration, firmware downloads, and troubleshooting. The EIA-232
connection is only used as a temporary connection. Connect the straight through, 9-pin serial
cable as shown in Figure 2.5.
Figure 2.5 EIA-232 COM Connection