User guide

www.rletech.com 12 970.484.6510
1 System Overview
1.3. Terminal Block Designations
Figure 1.1 Terminal Block Locations
1.4. SW1 Switch Settings
Item Description
Antenna 916 MHz RP-SMA connector
Antenna 418 MHz RP-SMA connector
Power 24 VDC/VAC Power terminal block
Jack Wall wart adapter connector
Status Status LED
RS232 Port DB9 female connector
RX TX RS485 LED Receive/Transmit status LED
RS485 Termination switch 1 (unused); 2 100 ohm termination
RS485 port EIA-485 circuit connector
RJ45 Ethernet port 10/100 BASE-T connector
Table 1.2 Terminal Block Designations
Status Indicator Figure
SW1-1 Not used
SW1-2 EIA-485 Termination
(On=100 ohm termination)
Table 1.3 SW1 Switch Settings