User's Manual
Table Of Contents
- Declaration
- 1. DS03 hardware introduce
- 1.1 Connectors
- USB host: connect external USB device
- OTG: Can be used as USB host or USB slave, connect
- TF: Insert Micro SD card
- HDMI: Connect with TV or monitor
- LAN: Connect with LAN cable to get network signal
- DC-12V: Power DC jack
- 1.2 Device connection Instruction
- 2. Remote control definition
- 3. Boot state
- 5. Settings
- 6. Browse /Copy Files
- 7. Install/Uninstall Apps
- 8. DLNA
- 9. Web Browsing
- 10. Local audio & video playback
- 12. Switch input methods
RKM DS03 User Manual
Page
8
setting finished.
5.3 Portable host pot
If connected the device with Ethernet (not WiFi ), then open portable host pot function, you could
regard DS03 as an wireless AP.
5.4 PPPOE Setting
If the network need dial-up, then click PPPOE Settings and input account and password.
Click “Setting
“More”
“PPPOE Settings”
input account and password.
5.5 USB
For exchange data between the DS03 and PC.
Operation steps
：
Equipment connection: Connect with computer through USB cable, please note you MUST plug
into USB Slave port of the DS03, which is for computer connecting.
5.6 Sound
This is for Sound settings;
Volume: Control volume level;
Operate prompt tone: Setting prompt tone during operating;
Screen saver sound: Setting screen saver sound.
5.7 Display
Font size: Setting font size according to your favorite.
5.8 Screen
This is for Screen settings:
1. Screen ratio: Used for adjusting screen ratio.
2. Output Interface: Default HDMI
3. HDMI mode: User can setting corresponding output resolution according to the TV.
Normally system will auto detective.