Owner's Manual

6 • 82-5201-01 Email Generator
Installation
1. Select the mounting site. When you select the mounting site consider the following factors:
Is an AC or DC power source available?
Is there enough room to open the housing door and make wiring connections (see Figure 2)?
2. The mounting feet and hardware to install the mounting feet are shipped in a bag inside the
housing. Install the mounting feet as shown below.
3. Position the monitor on a vertical surface at eye level (4 1/2 to 5 feet from the floor).
4. Use 3/16” screws through the slots in the mounting feet at each corner of the housing to secure the
housing to the mounting surface.