Owner's Manual

82-5201-01 Email Generator • 15
Power On and Input Emails/Texts
The device will generate emails and/or texts when the device powers on and/or when any of the
contacts close or open. You must make email/text settings for each event type (Power On, Input 1
Close, Input 1 Open, etc.) individually, even if they are all going to the same email address and/or
phone number. If you don’t want emails/texts sent for a particular event type, leave the fields blank.
1. Subject
: Enter the subject title for the email/text generated from the event type. The text must be
alphanumeric and cannot contain any special characters.
2. Message Body
: Enter the body for the email/text generated from the event type. The text must be
alphanumeric and cannot contain any special characters.
NOTE: The Power On message includes a WiFi signal strength percentage in addition to any entered
text.
3. Recipients
: Enter the email address(es) and/or phone number(s) you want to receive emails/texts
for the event type. Separate multiple email addresses and/or phone numbers with a comma (ie.
[e-mail],[e-mail]). Do not add any spaces between email addresses or phone
numbers. For phone numbers, you must use a XXXXXXXXXX@______ format where the
domain name used in the blank field depends on the number’s wireless carrier.
Wireless Carrier Domain Name
AT&T txt.att.net (SMS)
OR
mms.att.net (MMS)
Boost Mobile sms.myboostmobile.com (SMS)
OR
myboostmobile.com (MMS)