Manual

10 • Control Panel
Table 2: Control Button Functions
Control
Button
Control Button Function(s)
Control Button LED
Function(s)
BUMP
▼
• Initiates a bump test
• Cancels a bump test
• Moves down a list of
parameters
• Decreases an adjustable
parameter
Indicates status of a
bump test in progress
CAL. ▲ • Initiates a calibration
• Cancels a calibration
• Clears data from station
memory (when used with
COPY button)
• Moves up a list of parameters
• Increases an adjustable
parameter
Indicates status of a
calibration in progress
EDIT
ENTER
• Puts station into various edit
modes
• Makes a displayed parameter
editable
• Escapes or cancels an
operation
• Turns off connected GX-2009
(when used with POWER
button)
n/a
COPY • Copies data to USB flash
drive.
• Clears data from station
memory (when used with
CAL. button)
• Indicates amount of
calibration station
memory used
• Indicates status of
copying function
• Indicates the result of a
copy operation