User Manual

3 • Specifications
Specifications
Table 1: SDM-E2 Specifications
Input Power 12 VDC
NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz,
0.6A input and 12 VDC, 1.2A output provided as
standard.
Environmental Conditions • For Indoor Use Only
• -10° C to 40° C, below 80% Relative Humidity, Non-
Condensing
Applicable Instrument EAGLE 2
Memory Capacity 64 KB
Maximum Record Size 256 bytes
Maximum Number of
Records Saved
200
Number of Calibration Gas
Cylinders
Up to two calibration gas cylinders per bump test or
calibration at a time
NOTE: If your EAGLE 2 contains more than one non-standard
gas, more than two gas cylinders may be needed to complete a
bump test or calibration.
Standard Accessories • AC Adapter
• USB Flash Drive
• Single Module Data Viewer Software
• SDM Docking Station PC Controller Software
• Inlet Air Filter
• Instruction Manual
• 10 Foot Long Exhaust Tube
• Two 3 Foot Long Tubes for GAS 1 and GAS 2
Fittings
• 3 T-Fittings for PC Controlled Configuration
• Check Valve for PC Controlled Configuration
• USB Cable, Type A to Type B