Configuration User Manual

49 • Calibrating a GX-2012
7. Connect the exhaust line to the exhaust fitting on the GX-2012.
Figure 26: Inserting the GX-2012
8. Press and hold the POWER ENTER button on the GX-2012 until you hear a
beep, then release it. The GX-2012 will begin its power up sequence (see
exceptions below in step 9). If a successful connection between the instrument
GX-2012 or Gas
Tracer with Alkaline
Battery Pack
GX-2012 or Gas
Tracer with Li-Ion
Battery Pack