Configuration User Manual

Bump Testing a GX-2012 • 46
Figure 24: Screen Indication for Failed Bump Test and Failed Calibration,
Standard 4-Gas GX-2012 or GAS Menu Item in Edit Mode Set to Std
Figure 25: Screen Indication for Failed Bump Test and Failed Auto Calibration,
%Volume Sensor Installed and GAS Menu Item in Edit Mode Set to ALL
NOTE: If the GAS menu item in Edit Mode is set to Std, there will be no bump
test or calibration results for the %volume sensor and pressing and
releasing the EDIT ENTER button will have no effect.
22. After a successful or failed bump test,
• To perform any other operations:
To perform another bump test, press and hold the BUMP T button until the
F F
F F
F F
F F
%LEL
%
ppm
ppm
CH4
O2
CO
H2S
BUMP/CAL
10
17.0
30
15.3
%LEL
%
ppm
ppm
CH4
O2
CO
H2S
BUMP/CAL
CH4
BUMP/CAL
F F
F F
F F
F F
%LEL
%
ppm
ppm
CH4
O2
CO
H2S
BUMP/CAL
10
17.0
30
15.3
%LEL
%
ppm
ppm
CH4
O2
CO
H2S
BUMP/CAL
F F
vol%
CH4
BUMP/CAL
10
vol%
EDIT
ENTER