Instruction Manual

3 Product Components 3-3. Names and functions for each part

- 13 - RM-5000

Attach or detach the indicator/alarm unit from the single-unit case or multi-unit case according to the

following procedure.

(1) Attaching procedure

• Open the front cover of the indicator/alarm unit.

• Make sure that the power switch of the indicator/alarm unit is OFF.

• Insert the indicator/alarm unit along the rail into the single-unit case or multi-unit case.

• Push it in until an click is heard and you feel that it is locked in.

• Gently pull it to make sure that the indicator/alarm unit does not come off.

• Close the front cover of the indicator/alarm unit.

(2) Detaching procedure

• Open the front cover of the indicator/alarm unit.

• Make sure that the power switch of the indicator/alarm unit is OFF.

• While pressing the lock lever on the lower right of the indicator/alarm unit, hold the front cover and

pull it out of the case.

• Close the front cover of the indicator/alarm unit.

Front cover

Press

the lock lever upward.

CAUTION

Turn off the power of the indicator/alarm unit before attaching or detaching it. Otherwise, a failure

may be caused.

CAUTION

This is a precision device. Be careful not to drop it when detaching it. Dropping the unit

compromises its original performance or causes malfunctions.