User Manual

Pioneer Gas Monitor Operator’s Manual Operation • 23

Instrument Setup Program

This section describes the Instrument Setup program. You can display and change the

following instrument settings with the Instrument Setup program.

• Alarm On Delay

• Alarm Off Delay

• Relay Action

• Alarm Logic

• Alarm Silence

• Alarm Hysteresis

• Calibration Time Out

• Instrument ID (RS-232 or RS-485 address)

• Noise Filter

• Maximum Number of Channels (for use when connecting to other Pioneers)

• Zero Suppression

• Instrument Label

Navigating through the Instrument Setup Program

Use the program buttons to the right of the display screen to enter the program, move

forward or backward through the program, change settings within the program, and save

or cancel changes to the program settings. Table 4-2 lists the function of each program

button.

Table 4-2: Program Button Functions for the Instrument Setup Program

Button Function

ESCAPE • Moves you backward through the program

• Cancels changes made to the program settings

• Enters the program (with the ENTER button)

UP/YES • Updates the setting that is ﬂashing on the

display screen

DOWN/NO • Updates the setting that is ﬂashing on the

display screen

ENTER • Moves you forward through the program

• Saves changes made to the program settings

• Enters the program (with the ESCAPE button)