User Manual

CO Transmitter • 12 Pioneer Operator’s Manual

• To update the alarm 2 setpoint:

1. Use the UP/YES and DOWN/NO buttons to change the setpoint.

2. Press the ENTER button two times to accept the new setting and continue the

program.

The program displays the Alarm 3 Setpoint screen.

• To update the alarm type setting:

1. Press the ENTER button to select the alarm type setting. (The setting ﬂashes when

it is selected.)

2. Use the UP/YES or DOWN/NO button to change the setting.

3. Press the ENTER button to accept the new setting and continue the program.

The program displays the Alarm 3 Setpoint screen.

Alarm 3 setpoint screen

This screen indicates the setpoint and alarm type for Alarm 3. The default setting for the

alarm 3 setpoint for the CO channel is

100

. The default setting for the alarm type is

RISE

• To accept the settings and continue the program, press the ENTER button two times.

The program begins channel setup for Channel 2.

• To update the alarm 3 setpoint:

1. Use the UP/YES and DOWN/NO buttons to change the setpoint.

2. Press the ENTER button two times to accept the new setting and continue the

program.

The program begins channel setup for Channel 2.

• To update the alarm type setting:

1. Press the ENTER button to select the alarm type setting. (The setting ﬂashes when

it is selected.)

2. Use the UP/YES or DOWN/NO button to change the setting.

3. Press the ENTER button to accept the new setting and continue the program.

The program begins channel setup for Channel 2.

NOTE:

To exit the Channel Setup program, press the ESCAPE button. The Channel

Setup Exit screen displays.

anne

arm

PPM