Instruction manual

29
Tel. [phone] Fax [phone]
Air Sampling/Pumps
Dräger CMS Analyzer
Accurate gas measurements are made easier with the Dräger CMS. This new generation spot-
check detection device is literally as easy as 1-2-3 to operate. Simply insert one of the 55 chemi-
cal specific Dräger-CMS-Chips into the Analyzer and follow the instructions on the display as to
when to move the slide switch. TWA levels are typically analyzed in 1-2 minutes. Upon comple-
tion of this process, the concentration is indicated on the LCD display.
CMS does not require gas calibration. All measurement and calibration information is stored on
a bar code on the CMS Chip. An electronics and leak check is performed before each measure-
ment so you are assured of accurate indications every time. Operating on 4 “AA” cells, the CMS
will deliver about 100 measurements per battery change. Popular applications include TWA
screening, confined space entry, and emergency response.
Easy to Use »
Digital Display of Results »
UL, CSA, and MSHA Approved »
No Calibration Required »
On-Board Data-Recorder »
Air Sampling & Air Sampling Pumps
Description
Dräger-CMS
SampleRAE and Hand Pump by Rae Systems
SampleRAE is a hand-held, battery powered, programmable automatic sampling pump. It is used
with gas detection tubes (colorimetric tubes) and sorbent tubes. The user can easily program the
sampling volume required for each tube type. For example, some tubes require 1 pump stroke
(100cc) with a piston hand pump.
With SampleRAE you simply enter 100cc, press the start key and the pump will automatically
take the sample for you. A built in flow sensor measures the exact amount of sample volume and
shuts off the pump. SampleRAE is ideal for situations where multiple samples with detection
tubes are required.
The Rae Systems Hand pump allows for easy and accurate sampling 1/2 or full stroke. The Hand
Pump is for use with our line of Gas Detection Tubes. The Hand Pump, along with the Tubes,
offers quick, on-the-spot measurements of many gases and vapors at low cost without the need
for calibration.
Description
SampleRAE
Description
Hand Pump