Owner's manual

M2 Rig Monitor Operator’s Manual 44
Parts List
Table 11 lists replacement parts and accessories for the M2 Rig Monitor Transmitter.
Table 11: Parts List
Part Number Description
06-1248RK Calibration kit sample tubing (3/16 in. x 5/16 in.; specify length when ordering)
07-0033RK Cap gasket, for CSA type CO and H
2
S detector
07-0203RK Rubber retaining boot
14-2101RK Spacer between sensor and rubber boot
18-0400RK-01 H
2
S detector junction box with rubber spacers
18-0405RK-03 M2 junction box w/o cover
18-0409RK M2 junction box cover, with lens
45-6132RK Termination jumper
51-0096RK Strobe/horn, 10-33 VDC, NEMA 4X
65-2427RK-05 H
2
S detector with j-box (does not include cable or cable bushing)
65-2428 H
2
S detector assembly, CSA version
71-0234RK M2 Rig Monitor Operator’s Manual (this document)
81-0076RK-03 Zero air calibration cylinder, 103 liter steel
81-0151RK-02 Calibration cylinder, H
2
S, 25 ppm in nitrogen, 58 liter aluminum
81-0151RK-04 Calibration cylinder, H
2
S, 25 ppm in nitrogen, 34 liter aluminum
81-1051RK Regulator, with gauge and knob, 0.5 liter/minute continuous flow
81-1116RK Calibration cup/splash guard
ES-1537-H2S H
2
S sensor, plug-in