Manual

Page 27 GX-94 Operator’s Manual
SETUP MODE
The advanced microprocessor program in the GX-94 allows the user to
select and adjust many of the detection and data logging features. In
setup mode you can:
• reset the non-volatile RAM to default values
• update the gas combination
• update alarm point settings
• update the GX-94’s serial number
• set the temperature
• update the data logging interval time setting
• update the alarm latching setting
• turn the lunch break function on or off
• turn the user ID function on or off
• update the time calibration setting
• update the data logger alarm setting
• update the frequency in Hz of the buzzer sound
• view several internal voltage values
Tips for Using Setup Mode
• Press (SHIFT)/▼ to scroll down through the main menu and
submenus, and to lower values in a specific option.
• Press AIR/▲ to scroll up through the main menu and submenus, and
to raise values in a specific option.
• When in the main menu, the number in front of a menu item will
flash indicating the cursor position and that the item is selected.
• Press ON/OFF/INPUT to enter a selected menu item, and to enter
data during programming.
• An adjustable parameter that is flashing can be adjusted with the