User guide

Model GX-86A Instruction Manual
Page 38 Hayward, California [phone]
SET LOG ALARM
Sets the value of Data Logger memory capacity alerts on the GX-86A.
Default setting is off, with a range of 1 - 100%. Tip: hold AIR or
(SHIFT) to scroll rapidly through values.
AUTO CAL.
The procedure is the same as described in Calibration and
Maintenance, Auto Calibration.
DISPLAY VOL.
Displays the output (in mV) for each of the active sensors.
START
Press ON/OFF/ENTER to begin the instrument’s normal start-up
sequence.