User Manual

Viewing, Printing, Exporting, & Deleting Data in the Data Window • 23
Viewing, Printing, Exporting, &
Deleting Data in the Data Window
The instrument logs seven types of data files: bump test data, calibration
history, bar hole data, interval trend data, alarm trend data, snap log data,
and event data.
You can view, print, and export (save to a file) each of these types of data
files. All of these types of data files can also be deleted. The deleting of
files is password protected and is described in “Deleting Data in the Data
Window” on page 59.
NOTE: If the GX-2012 Data Logger Management Program database is
on the user’s computer (default setting), data will only appear for
instruments downloaded to that computer. If the database is on a
network, data will appear for all instruments downloaded to that
database. See “Accessing a Common Database” on page 14 for
more instruction.
All the data, other than the most recent calibration and bump test
information that is accessible in the Last Calibration Window, can be
accessed in the Data Window. The Data Window is accessed by clicking
Data along the right side of the program window.