User Manual

20 • Downloading Data from an Instrument
7. If the unit has been downloaded manually (Automatic Download not
selected), the unit’s instrument information may be viewed after
downloading by using the Instrument Information control button if the
unit is still turned on and connected to the computer. The instrument
information includes instrument parameters such as serial number and
alarm points. It also includes the results of the most recent successful
calibration for each channel and, if the bump test feature on the
downloaded unit is activated, the most recent bump test results. To
view instrument information for a unit, click Instrument Information
along the right side of the Download Window. The Instrument
Information Window displays. This screen cannot be printed from the
downloading software. If the unit is turned off, the Instrument
Information window will be blank.
Figure 15: Download Messages & Download Commands
Download
messages
Instrument
Clear data
Use to download all data
Use to
download
subsets of
the data
button
Use to turn
off
ID
instrument