Instruction Manual

100 Overview GX-2012 Operator’s Manual
Chapter 6: Maintenance Mode
Overview
This chapter describes the GX-2012 in Maintenance Mode. In Maintenance
Mode, you can:
update the date and time
perform a fresh air adjust
perform an auto calibration
perform a single calibration
perform a bump test
turn the lunch break setting on or off
update the alarm latching setting
turn alarm silencing on or off
update the interval trend time setting
update warning, alarm, STEL, and TWA settings
turn the clear data logger screen on or off
turn the bump test function on or off
turn the pump off screen on or off
update bump test parameters
update the confirmation beep setting
update the data logger overwrite setting
update the calibration interval setting
turn the calibration reminder function on or off
update the calibration expired action setting
update the calibration check setting
update the bump test interval setting
turn the bump test reminder function on or off
update the bump test expired action setting
update the bump test check setting
turn the ID display function on or off