User Manual

Read Commands • 2 5
5. The program will retrieve the instrument’s par ameter
configuration and most recent calibration information then
add them to an existing .csv file or save a new .csv file with
the instrument’s parameter configuration and most recent
calibratio n information as descr ibed in step 3 above.
6. Use a spreadsheet p rogram such as Microsoft Excel to open
and view the saved .csv files.
7. The instrument’s parameter confi guration is now loaded in
the User Setup Program and the parameters are available
for updating in t he GX-2009 St atu s area of the Main Window
and in the Factory Settings Window. T he Factory Settings
Window is accessed using the Detail Settings command
button in Sett ing Commands. See “Detail Settings” on
page 44 for a description of Detail Settings.
8. See step 5 through step 9 in “Instrument Information” on
page 20 for instructions to update parameters in the GX-
2009 Status area of the Main Window.