User Manual

Read Commands • 2 3
8. When the uploading is complete, the program will indicate
that it is done .
9. Click OK. The program will return to the Main Window.
Information Get & Save
Use Information Get & Save to load a connected instrument’s
parameter configuration into the User Setup Program and edit
parameters, just like Instrume nt Inform at ion. In addition, you
can save an instrument’s parameter configuration and most
recent calibration information to a .csv (comma sep arated
value) file which can be opened with a spread sheet application
such as Microsoft Excel. Follow these steps to retrieve a
connected instrument’s parameter configuration, update
parameters in the GX-2009 S tatus area, and save the parameter
information and most recent calibrat ion information to a .csv file:
1. Launch the GX-2009 User Setup Pro gram as described in
“Launching the Program” on page 14.
2. Connect a GX-2009 to the User Setup Program as described
in “Connecting a GX-2009 to the User Setup Program” on
page 15. The Read Command buttons are now active and
the Filename Suffix at Save field is available for entering a
filename suff ix.
Figure 17: Upload Complete Window