User Manual

Read Commands • 2 1
downloading information from the instrument.
4. The instrument’s parameter confi guration is now loaded in
the User Setup Program and parameters are available for
updati ng in the GX-2009 Status area of the Main Window
and in the Factory Settings Window. T he Factory Settings
Window is accessed using the Detail Settings command
button in Sett ing Commands. See “Detail Settings” on
page 44 for a description of Detail Settings.
5. Various pa rameters are available for updating in the GX-
2009 Status area. The fields for these parameters are white.
Items in grey fields such as the Program Number and SUM
cannot be edited. The following items can be changed:
• Serial No., Station ID, and User ID
Click in the field and type in the desired string.
• Interval Trend Time
Click in the f ield. A drop down menu will appea r . Select the
desired value.
• Alarm Points & Auto Cal. Value
Double click in the field and type in the desired setting.
• Enable Status
Click in an enable selection box to select or deselect the
Figure 14: Instrument Information Downloading