User Manual

Read Commands • 1 9
configuration to a file and changing the instruments parameter
configuration. The three basic com mand sets for performing
these operations are the Read Commands, Write Commands,
and Setting Commands. These command set s are described in
the sections that follow.
Read Commands
Use the Read Commands to retrieve parameter configuration
information f rom a GX-2009 so the program knows which
instrument is connecte d to it and to save several of the
instrument’s parameter settin gs and most recent calibration
information to a .csv (comma separated value) file. The two
Read Commands are Instrument Information and Information
Get & Save.
Figure 12: Read Commands, Blanked Out