User Manual

16 • Connecting a GX-2009 to the User Setup Program
If your computer does not have a built in infrared port, place
the GX-2009 within an inch or two of the infrared port on t he
IrDA adapt er cable as sh own in Figure 10 below, aligning the
infrared port on the top of the GX-2009 with the infrared port
on the cable.
3. Press and hold the
POWER MODE button on
the GX-2009 unt il you
hear a beep, then release
it. The GX-2009 will beg in
it’s power up sequence
(see exceptions below in
step 4). If a successful
connection between the
GX-2009 and the
computer occurs, the
Connect Light in the
Status area turns green after a few seconds and
“GX-2009 . . . Connecti on Successful.” displays in the
Download State area. The following screen will appear on
the GX-2009 display and The Windows
®
icon tray will
To Computer
USB Port
Infrared Port
Cable's Infrared Port
GX-2009
Sensor Diffusion Port, 4X
Figure 10: Aligning the GX-2009 with the Cable Infrared Port
Figure 11: Connection
Message